Latest news

NEW DEALER FOR AUSTRALIA

Special offers

Check out the specials page for our latest offers.

Call us on

UK
(01405) 862688

Outside UK
44 1405 862688

Email
info@pwm-sales.co.uk

What customers have to say about our work

"For over fifteen years we have come to rely on PWM and the products they supply. We can depend on them 24/7 to deliver quality, reliable equipment when required. The after sales service and technical support they provide is second to none". Active Floor Prep

"PWM go that extra mile to ensure that we receive the best quality equipment and consumables available. They are highly responsive to customer needs and can be relied upon to provide first class support and service."
Chris Macleod, Grimsby Resin Floors

"I feel I must tell you that I am over the moon with
the TV50 and C-tec cutting cowl. I used it for the first time today, and was amazed how well it
worked. It's worth it's weight in gold. Thanks very much."
Regards Phil Hone.

CT250 Planer Scabbler

<< Back to list

Price: £4,979.00

Call us on 01405 862688

Working Width	250 mm
Flail Shafts	6 x 16 mm dia
TCT Cutters	132 @ 60 mm dia
Beam Flails	540 @ 60 mm dia
Milling Cutters	54 @ 60 mm dia

400 Volt	7.5 kw
Petrol	11 PS

Weight	135 kg
H x W x D	99 x 44 x 104 cm
Dust Port	70 mm
Dust Collector	TV 200

With or without the power drive system this is a very serious piece of equipment - consistently outperforming larger machines.

Features include:

Robust chassis, accurately fabricated and then machined for long bearing life
3 phase and petrol models
Vibration damped handle assembly
Depth setting by both hand-wheel and quick-lift lever
Reliable, strong HTD ‘toothed’ drive belt
Dust free operation using 70mm vacuum port


	The CT 250 long life drum assembly is massively strong, with 16mm flail shafts and full width hexagonal drive. The 60 mm dia TCT, Beam or Milling cutters can be fitted in various configurations for a wide range of applications including the ever popular grooving of concrete floors in cowsheds.

CT250 Power Drive & Diamond Planer

CT250 Power Drive is available with a three phase (7.5 kw) electric motor or 11hp petrol-engine. The integral drive motor is powered from the main electric supply or from an alternator fitted to petrol-engined models, the latter providing total independence from an electrical power supply.

The variable speed drive improves productivity, control and surface finish, greatly reducing operator fatigue. Used with TCT or Milling Cutters consistent results can be produced over extended periods. Operating the cutter drum in the reverse direction, up-cutting, the CT250 will remove the toughest of coatings with minimal operator effort.

The Diamond Planing head and standard ‘flail’ drum are interchangeable on the CT250. The Planing head can be configured with up to five 40 mm wide planing rings, each ring is fitted with 18 diamond segments. Combined with the accurate control features of the Power Drive system, the Diamond Planing head achieves a uniform finish with low levels of noise and vibration.


	Planing rings and segments can be manufactured to meet specific requirements and site conditions.


Controlled – High Productivity – Low Maintenance - Low Vibration – Dust Free


	The detachable CT Truck (3 phase or petrol) can be fitted to the CT250 / 350 planers and the Delta 2 twin headed Diamond Floor Grinder. The earliest examples are still working reliably after over fifteen years continuous hard use!