EPO180 Hand held Surface Scabbler

EPO180 Hand held surface scabbler

EPO180 Hand held surface scabbler is a versatile renovation and prep tool that will clean, key and prepare interior and exterior wall and floor surfaces. The EPO180 scabbler is excellent for stripping many exterior coatings and interiors prior to renovation works including re-plastering and keying cellar walls for tanking. The EPO 180 scabbler can be fitted with a range of freely rotating cutters to key and peen the surface. The cutters are easily replaced when worn. An effective dust control guard can be purchased separately.

C5 Solid Tungsten Cutter

C4 Solid Tungsten Cutter

C6 Tungsten Tipped Cutter

C2 Hardened Steel Cutter

C5  - Solid tungsten star cutters are for keying hard coatings.

C4  - Solid tungsten carbide claw cutters are for shaving off coatings; leaving a peened finish

C6  - Tungsten carbide tipped cutters, heavy duty applications on render and plaster. They leave rough, textured finish

C2 -  Hardened steel star cutters for use on steel for the removal of paints and coatings leaving a smooth finish.

Dust Free operation - the EPO180 can be operated dust free when fitted with a dust hood and connected to a suitable vacuum. Minimum power vacuum for good results 1500W

Applications:

• Replaceable cutters
• Hardened steel, Solid tungsten or tungsten carbide tipped cutters
• Leaves smooth, peened or roughened surface
• For paint, render & refurbishment
• For scabbling concrete & render
• Taking off masonry paints & coatings
• Stripping internal paints & exterior coatings
• Chipping off paints & textures
• Cleaning masonry & brick
• Keying back internal walls & plaster
• Taking off floor paints

Specifications:

• Power                      1500w
• Speed                      1300-4000 rpm
• Weight                      5.9kg
• Prep head                150mm / 6"
• Prep rate up to         30m/hr
• Vibration level          7.9m/s
• Noise level               79dBA
• Voltage                    110v or 230v