Delivery

 

We know how important it is to deliver your purchases as quickly as possible to avoid downtime onsite. That’s why our standard delivery service is normally “Next Day” .

We carry high levels of stock right across our range for local collection or next day delivery! Normally an order received before 4pm will be shipped on a next day service.

Orders placed for delivery outside mainland UK e.g. Ireland normally take 2-3 days. International deliveries are by agreement.

 

FAQ

 

Below are a few of the common questions we are asked and the solutions.

Concrete Polishing and Grinding User Guide

Complete Polishing Package Equipment 1x FTR Grinder / Polisher, 110v, inc drive disc and dust skirt 1x TV120 Industrial Vacuum, 110v, inc 7m of hose Stages 1 & 2 Diamond Grinding Segments Stage 1 to 5 Polymer Polishing Buttons Spektrin Lithium Plus Floor Sealer /...

FAQ – Adjusting the Height of the Grinding Wheel

    For maximum efficiency, the Dust Muzzle should touch the work surface at the same time or slightly prior to the grinding wheel, thereby creating a face seal.  This is what the final installation should look like. Note that in this photo the wheel is...

FAQ – Dust Muzzle Crack Chaser

All Dust Muzzles are sold round and unaltered but they are easily converted into crack chasing and cutting tools with four easy steps. This allows the users to set the depth of cut to their own preference rather than to a pre-determined depth as is the case on...

FAQ – Saw Muzzle

Faux grout lines are commonly seen in decorative floors, either because they were specified or as an afterthought. In some cases the operator makes a “kiss cut” of less than ¼” depth and in other cases a slightly deeper cut is made and the groove is re-grouted. In...

FAQ – Dust Muzzle – Close to a Wall Grinding

If an operator needs to do zero tolerance grinding, it is recommended that one grinder/Dust Muzzle combination, normally a grinder with a 7” diamond cup wheel, be dedicated to the field and a second grinder with a 4-5” wheel be dedicated to working around the edges....

FAQ – Dust Muzzle – Maximise Efficiency

Maximizing the efficiency of the Dust Muzzle depends upon two things: 1) correct installation of the Dust Muzzle on your grinder. 2) having a vacuum that is powerful enough to collect the dust. For maximum efficiency, the Dust Muzzle should touch the work surface at...

FAQ – A Primer on Vacuums

There are three important things to look for in a vacuum: CFM, static lift and filtration. CFMCFM is an abbreviation for cubic feet per minute. This is a measure of the volume of air the vacuum is moving. Most vacuums move enough air to work with point of origin dust...

FAQ – Dust Muzzle For Hole Saws

The 8” Dust Muzzle DC is a hands-off dust collector that can be easily used for dustless cutting with hole saws and core bits. It comes in two sizes. The 2.375” model, DM2DC will handle bits from 1-2” and the DM3DC handles bits from 2-3”. The Dust Muzzle DC can be...

FAQ – Adapter Ring

The stretchable adapter ring that comes with the Dust Muzzle Ultra is not needed on all grinders. It is only used on grinders with the smaller bearing housings to prevent the hose clamp from pinching off. The bearing housing is the part of the grinder indicted by #2...