SP13 Compact Dust Control vacuum is “M” certified with a very high specification that has been developed for the effective control of fine concrete dust and similar. Compact dimensions make it ideal for workshop use or transportation in a vehicle. Features automatic filter cleaning and remote stop / start.
The SP13 Compact Dust Control vacuum has been developed for effective dust control when connected to hand held power tools, grinders and polishers. The SP13 is ideal for joint cleaning , mortar raking prior to re-pointing, crack chasing, grinding, sanding and polishing – just about any difficult application involving large volumes of very fine cementitious dust. The SP13 is fitted with a high quality, large area cartridge filter that is cleaned by an electrical shaker that requires no service or adjustment. An optional carbon impregnated pre-filter can be fitted to help prevent build up of dust on the filter and also improves the filter cleaning process by reducing static charge. The dust container and inlet port are both manufactured in an anti static material that effectively reduces the build up of electrostatic charge often associated with the collection of fine dust. The compact dimensions and sturdy construction make the SP13 ideally suited to the demands of the flooring and construction industries.
- Automatic filter cleaning
- Optional manual Filter cleaning
- Conical Polyester cartridge filter
- “M” Category filter
- No loss of suction power
- Conductive “plastic” tank and port – reduce potential “static” shocks
- Auto stop/start of vacuum by grinder or power tool.
- Vacuum will continue working for a short time after remote stop.
- Automatic filter cleaning when vacuum is stopped
The SP13 is supplied complete with hose and connectors, floor wand and two floor tools, round brush, crevice tool and stepped connector. Additional hose lengths are available to order
The remote control feature permits remote auto stop/ start of the vacuum on demand by starting/ stopping any electrical tool that is connected to the vacuum. The vacuum stops after a short delay to ensure all dust is collected, the filter is then automatically cleaned for approximately 15 seconds.
Under really dusty conditions the operator can override the automatic function and clean the filter as required. The SP13 is one of the most sophisticated vacuums available for the control of fine concrete, brick and similar dust.
As with all vacuums filter life and overall efficiency can be greatly improved by placing a cyclonic interceptor between the power tool or dust source and the vacuum. A cyclonic interceptor can remove up to 99% of airborne dust before it reaches the vacuum filter preventing a dramatic drop off in performance and increased or accelerated wear to the filter and motors. For further information please see our full range of interceptors.
|Voltage||110v / 240v|
|Vacuum||2230 mm H2O|
|Dimensions (HxLxW)||39 cm x 39 cm x 79 cm|
|Dust Port||Ø38 mm|
|Waste Drum Capacity||37L|